Pool Filter Cleaning in Boerne, TX

A clean filter is the heart of a clear pool. We meticulously disassemble, degrease, and restore your filtration system to protect your pump and keep your Boerne pool perfectly clear.

DE Filter Cleaning

We completely disassemble the tank, wash down every individual grid to remove old powder and oils, inspect for tears, and recharge the system with fresh diatomaceous earth.

Cartridge Filter Washing

Our technicians carefully extract your pleated cartridges and use specialized high-volume, low-pressure nozzles to clear deep-seated debris without tearing the delicate filter bands.

Sand Filter Maintenance

We perform extended backwashing routines and apply specialized sand-cleaning chemicals to break up calcified channels, ensuring your sand bed catches fine particles effectively.

Grid & Manifold Inspection

While the filter is open, we thoroughly inspect the internal manifold for hairline cracks and check the air relief screen to prevent dangerous pressure buildup.

O-Ring Lubrication

We clean the main tank belly band and apply fresh, waterproof silicone lubricant to the large O-ring. This guarantees a proper seal and prevents frustrating air leaks.

Pressure Gauge Calibration

We verify that your pressure gauge is reading accurately. A working gauge is your first line of defense in knowing when your pool needs its next cleaning.

Our technicians are thoroughly trained on all major manufacturers, including Pentair, Hayward, and Jandy filtration systems. We understand the unique teardown procedures for Pentair Clean & Clear Plus arrays, the exact tension requirements for Hayward ProGrid belly bands, and the specific manifold designs of Jandy CV series filters.

When replacement parts are necessary, we source original equipment manufacturer components. Using the correct grids, genuine replacement cartridges, and the exact specified O-rings ensures your filtration system operates safely and effectively for years to come.

Safe Disassembly

We shut off all power to the pump at the breaker to ensure safety. We then bleed the air pressure from the tank, remove the tension band, and carefully extract the internal filter elements.

Deep Cleaning

Using specialized nozzles, we wash away months of dirt, oils, and debris from every grid or pleat. We inspect the manifold for cracks and clear the tank base of accumulated sludge.

Reassembly & Testing

We lubricate all seals, reassemble the tank, and securely tighten the band. Finally, we prime the pump, check for leaks, and record the new clean operating pressure.

Our comprehensive filter cleaning service includes the complete teardown and reassembly of your filter tank. We wash down the internal elements, inspect all grids or cartridges for damage, lubricate the main belly band O-ring, and test the system upon restarting. For DE filters, the fresh diatomaceous earth powder required to recharge the system is always included.

If we discover broken parts during the cleaning process, such as a cracked manifold or a torn grid, we will stop and show you the damage. We will provide a free written quote for the replacement parts before proceeding. You are always in control of your equipment repairs, with no pressure and no surprise charges.

How often does my Boerne pool filter need to be cleaned?

Can I just hose off my filter cartridges myself?

Why is my filter pressure still high after a backwash?

Do you replace broken grids or torn cartridges?

How long does a professional filter cleaning take?

Will a clean filter save me money on electricity?